San Juan Island Small House Update

Today is a very strange day because I am at home for the day…the first day in ages I haven’t been on the building site. We are at a transitional point in our build and must take some time to build the eave bracket components of the roof assembly. There are twelve to build so it will take a couple or three days to do it. Frankly, we are having a west coast heat wave and it’s not such a bad thing to be able to work from home in the shade, so that’s what we’re doing.

This week we wrapped up some various projects. Shawn did a tremendous amount of blocking, installing bird blocking (no holes drilled yet, but all installed and waiting final preparations) and also blocking the entire first floor. I did a lot of caulking and air sealing while Shawn was installing 1 ¼” 20 gauge metal strapping over the rafters to tie the rafters to the ridge (performing a function similar to collar ties in that it prevents uplift). This was a preferred method for us as it will allow us to have unbroken bays for insulation. We also built dummy rafter tails and installed them under the north and south dormers. Dummy rafter tails are non structural but important aesthetically as they allow the rafter tails to continue on despite the fact that the actual structural rafter tails only appear above the dormer (where they are performing). Once those were in, it was time for me to apply their two coats of primer in preparation for painting later this summer. I needed to do this before we install the decking over them and it becomes too hard to do. We ordered the ⅝” plywood sheathing for the roof, though it will be a bit before we can install that. We also have the eave decking on order and will get that into place once the brackets are built, primed, painted and installed. This week we also built the gable end walls, installed the second floor plywood up to the point where we can put the brackets on. It was so amazingly easy to do with a framing nailer that I found myself thinking the absolutely bizarre thought that putting up plywood sheathing was fun. The building being square made the installation easy and straightforward and it’s nice to have things getting closed in upstairs. Lastly, we visited a local cedar and fir mill and officially placed an order for the materials for the pergolas and the front entrance. Building these will be an exciting and enjoyable (and very useful) experience. We think the wood is going to be just beautiful and amazing!  The cedar pergola timbers will be gorgeous - can’t wait to see them!

It feels as though we did a lot of little things this week. It’s awfully strange to be at home for a few days but nice to catch up on component building in the shade at our rental.

More to come next week…hope that you will join us again.